[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Refer to these numbers whenever you call upon your Sony dealer regarding this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] notes on the cassettes · If you use a cassette tape set to prevent accidental erasure, you cannot superimpose the title. You can superimpose about 11 to 20 titles in one cassette, if one title consists of about 5 characters. If the tape has too many index signals and photo data, you may not be able to superimpose a title because the memory is full. (3)Turn the control dial to select the title you want to erase, then press the control dial. (4)Make sure the title is the one you want to erase, then press control dial again. Note If you use a cassette tape set to prevent accidental erasure, you cannot erase the title. If you use a tape with cassette memory, you can make one title of up to 20 characters and store it in memory. (3)Turn the control dial to select the column of the desired character, then press the control dial. (4)Turn the control dial to select the desired character, then press the control dial. In step 3, turn the control dial to select [ M ] then press control dial. Para borrar un carácter To change the title you have made In step 2, turn the control dial to select the title which you want to change, then press the control dial. the label can consist of up to 10 characters and is stored in cassette memory. When you insert the labeled cassette and turn the power on, the label appears. (5)Turn the control dial to select the column of the desired character, then press the control dial. (6)Turn the control dial to select the desired character, then press the control dial. In step 5 turn the control dial to select [ M ], then press the control dial. To change the label you have made Insert the cassette to change the label, and operate in the same way to make a new label. if you have superimposed titles in the cassette When the label is displayed , up to 4 titles also appear. Note on "-----" displayed on the menu The "-----" indicates the number of characters you can select for the label. When the "-----" indicator has fewer than 10 spaces, the cassette memory is full. Note on the cassettes If you use a cassette tape set to prevent accidental erasure, you cannot label it. "Editing" is to make a new tape from a prerecorded tape by deleting unnecessary scenes and allocating the scenes you want in the desired order. [. . . ] If the functions still do not work, press the RESET button at the bottom of the VCR using a sharp-pointed object. (If you press the RESET button, all the settings including the date and time return to the factory setting. When the CHARGE lamp does not flash again If the CHARGE lamp lights up and goes out after a while, there is no problem. When the CHARGE lamp flashes again The problem is with the AC adaptor/ charger. [. . . ]